Casing Scrapers

The Toro Model CS Casing Scraper is ideal for the removal of mud, cement, rust, scale, paraffin, perforation burrs and other obstructions from the inside walls of casing.

Maintaining a clean casing ID is important when operating drilling, fishing, or wireline tools.  Likewise, packers, patches, spears, and similar tools require clean surfaces to grip.  Obstructions on casing walls wil frequently cause these tools to fail or become difficult to operate.

Utilizing a simple one-piece mandrel design, the Toro Model CS Casing Scraper is constructed to be rugged, yet simple to operate and maintain.   The Casing Scraper conditions more surface are than most other scrapers on the market.  The full circle blades are spaced to contact 360 degree of casing surface at once.

Short and compact, the Toro Model CS Casing Scraper also incorporates a  generous taper on the blades for passaging through joints without hanging up.  The Casing Scraper works in both vertical and rotary operations and may be run using either drill pipe or wireline.

Toro Model CS Casing Scrapers are available from 4-1/2 inch to 9-5/8 inch casing sizes.  For more information, please click on the specification sheet below (requires a PDF reader to view).

Toro Casing Scraper Spec Sheet

Toro Model CS Casing Scraper Specification Sheet

Toro Model CS Casing Scraper

Toro Model CS
Casing Scraper

    Toro Downhole Tools
    16626  FM 292 Rd.
    Tomball, TX  77377
    U.S.A.
    281-580-8676
    1-888-662-8676
    sales@torotools.com